BenQ HT2060 vs ViewSonic LX700-4K

Every published specification for both, with the brightness standard shown beside each figure and the screen geometry worked out from each maker’s own throw ratio. Rows where the two differ are tinted.

BenQ HT2060 projector

BenQ

BenQ HT2060

A 1080p LED projector built around color accuracy rather than pixel count: 98% Rec.709 out of the box, a 20,000-hour LED that never needs a lamp, and just enough vertical lens shift to clear a coffee table.

Best for: A movie-first 1080p setup that should never need a lamp

ViewSonic LX700-4K projector

ViewSonic

ViewSonic LX700-4K

3,500 ANSI lumens from a 20,000-hour laser in a 7.3 lb body, with a 1.36x zoom and a short 1.06 minimum throw.

Best for: Bright-room viewing from a shelf, without a mount

Specification comparison of the BenQ HT2060 and the ViewSonic LX700-4K
SpecificationBenQ HT2060ViewSonic LX700-4K
Approx. price~$1,249~$1,300
TypeHome theaterHome theater
Brightness2,300 lumensANSI3,500 lumensANSI
Imaging techDLPDLP
Native resolution1080p4K pixel-shift
Light sourceLEDLaser-phosphor
Light source life20,000 h20,000 h
Throw ratio1.15–1.5:11.06–1.45:1
Screen at 10 ft92–120 in95–130 in
100-inch screen at8 ft 4 in–10 ft 11 in7 ft 8 in–10 ft 6 in
Zoom1.3x1.36x
Vertical lens shift+10%-15%
Horizontal lens shiftNoneNone
Dynamic contrast500,000:13,000,000:1
Max signal4K601440p120
Input lag33 ms17 ms
HDR formatsHDR10, HLGHDR10, HLG
3DYesYes
Built-in streamingNoneNone
Speakers10 W15 W
HDMI2 × 2.02 × 2.0
Fan noise33 dB31 dB
Weight7.9 lb7.3 lb
BatteryNoneNone
Released20232024

BenQ HT2060: what it gives up

  • 1080p native — a 4K signal is accepted and downscaled
  • 33 ms at 4K/60 and 60 Hz max make it a poor match for a current console
  • No streaming built in, so a stick lives in the back panel
  • LED brightness is measured honestly here, but 2,300 ANSI lumens is a dim-room number on a big screen
  • It costs meaningfully more than the lamp model it replaced, which was already very good

ViewSonic LX700-4K: what it gives up

  • Lens shift is downward only (-15%), so it wants to sit above the screen line
  • HDMI 2.0 caps 4K at 60 Hz
  • No smart platform at all
  • A single 15 W mono speaker
  • Its throw ratio sits between the usual short-throw and standard-throw bands, so an existing mount frequently has to move

Full specifications: BenQ HT2060 · ViewSonic LX700-4K